how to clean polycarbonate sheet

When cleaning, it must be rinsed with warm water below 60℃;

Neutral detergents should be used when cleaning, and detergents that are corrosive to PC boards are not allowed;

It is required to wipe gently with a soft cloth or sponge and neutral liquid. It is forbidden to use coarse cloth, dirty cloth, brush, mop and other hard and sharp tools for cleaning;

When grease, wet paint, tape marks, etc. appear on the surface, it can be wiped off with a soft cloth sufficiently moistened with anhydrous alcohol, kerosene or gasoline;

The dirt under cleaning must be thoroughly rinsed with clean water;

Finally, use a clean soft cloth or sponge to dry and polish the surface of the board, and no obvious water marks should be used;