What are the advantages of PC Solid Sheets over FRP Sheet?
PC Solid Sheet and FRP usually are used in Construction Roof for light. So What's the different between PC Solid Sheet and FRP Sheet.
| PC Solid Sheet | FRP | |
| Compressive Strength | HIGH 250 times higher than conventional glass, 30 times higher than Acrylics | POOR easy to crushing and breaking |
| Transmission | more than 85% transmission widely used in building lighting, lamps, lenses and so on | below 50% |
| Impact Resistance | High impact Resistance PC Solid sheet known as transparent steel plate. With good impact resistance, widely used in highways, railway soundproofing materials wind pressure. Even at 120 degrees, its tensile strength is high. | Only 1/6 of that of PC material. In severe weather conditions, it is extremely easy to be damaged, such as heavy impact easy to penetrate, wind pressure is too high easy to fall off around the screw hole. |
| bending performance | good bending resistance, even if the bending angle of 90 degrees, still does not break | easy to break when bending |
| Temperature Resistance | -40-120， | Aggravated under long-term high temperature, and the life is short |
| Weather Resistant | With UV layer, high weather resistance. Anti-yellowing ,anti-aging.Even if long-term exposure to outdoor, there is no significant change | Easy to age, the transmission rate gradually decreased, after 2 years the transmission rate of about 30%. |
