WHERE CAN A PERGOLA BE INSTALLED?
To make sure your pergola stands solid and safe, it's crucial to pick the right spot for it. First off, your pergola needs a sturdy foundation. Below the surface, there should be something solid to anchor the pergola to, like a concrete pad. If you're getting professionals to set up your pergola, ensure this foundation is ready before they come.
UNQ’s experienced pergola installers do not deal with the groundwork. So, it's up to you to sort out the groundwork. If you're not sure about doing it yourself, consider hiring a groundworks specialist or a local handyman with experience in this area. They'll ensure your pergola has a reliable base.
SLOPING SURFACES
If you're planning to set up your pergola on uneven ground, no worries! Aluminum louvered roof pergolas are designed to work with the slope of your surface, ensuring rainwater naturally flows away. So, a slight slope is always good.
If a larger adjustment is necessary, it might impact the product's warranty since customized work might be required.
MANAGING THE GROUNDWORKS
Before you kickstart any groundwork, it's a smart move to decide on the size of your upcoming pergola. You'll receive a floor plan that shows you where the pergola's footplates will go. To ensure stability, it's a good idea to use concrete pads, roughly 40x40x40cm in size, under tiles or similar surfaces. If you have a deck, you can follow the same approach or add extra support beams underneath for a sturdy setup.
Once your surface is prepared, you can add tiles or decking on top. This way, when our pergola installers show up, they can easily drill through the tiles or decking and secure each footplate to the pads or support beams below, making the installation a breeze.
WHAT IF YOU HAVE ALREADY LAID A PATIO OR DECKING?
If you're looking to attach a pergola to an existing surface like a patio or deck, it's essential to investigate what lies beneath to ensure it's stable. Some surfaces, like sand commonly found under decking, or composite decking, might not provide enough security without additional support.
However, there might already be sturdy structural beams beneath the spot where the pergola's footplates will go. This can work just fine as long as these beams are wide enough to securely bolt the footplates onto.
Regardless of your surface choice, it's crucial to inspect what's underneath it. Your pergola should never be unsteady, and if you plan to install it without professional assistance, this is a critical factor to keep in mind for a secure setup.
WHAT IF YOU ARE INSTALLING SCREENS OR SIDE OPTIONS?
If you're adding screens or side features to your pergola, getting the installation level is crucial. It's important to measure the legs accurately both at the top and the bottom to ensure these side options work smoothly.
Once the measurements are spot on, you can securely bolt down the pergola legs before attaching any side options. This precision ensures that everything fits and operates as intended.
PLANNING PERMISSION
Pergolas are typically not considered permanent structures, which often means you won't need planning permission. However, it's wise to discuss this when choosing the right pergola. They're usually attached to an existing surface rather than being permanently cemented into the ground, making them easily disassembled and relocated without the need for planning consent.
Keep in mind that the pergola's height can sometimes affect neighboring properties, so it's best to place it as far from property boundaries as possible, though not mandatory if it's on natural ground. To avoid potential conflicts, consider consulting your neighbors, especially if there are concerns about obstructing sight lines. Here are some important points to note:
If the pergola is within 2 meters of the boundary, its height should not exceed 2.5 meters (about 8'2").
Front yard installations may require planning permission.
Planning permission is necessary if you live in a conservation area or plan to place the pergola between your house and the boundary.
If your property is a listed building, planning permission is likely needed.
Adding a pergola to a veranda, balcony, or raised platform may sometimes require planning permission due to increased height, and it should comply with Building Regulations.
If you're unsure about any of these aspects, it's a good idea to contact your local planning authority for guidance.
CAN YOU DO IT YOURSELF?
When you purchase a pergola, it will come with user-friendly instructions that make self-installation possible, assuming you have some basic DIY skills and an extra set of hands to assist you. You'll also need a set of tools, which might include a rivet gun depending on the pergola screens you choose. Please note that we don't provide rivet guns.
The time required to assemble your pergola generally falls between 1 to 5 hours, depending on its size and model. Don't worry; installing it yourself won't affect the manufacturer's generous 5-year warranty for the frame or the 2-year warranty for the screens.
If you're mounting the pergola on porcelain tiles, we suggest using a diamond drill fitting to prevent cracking. Our Suns Lifestyle professional installers always come prepared with the right tools for your specific surface. If you're unsure, it's a wise choice to consider our nationwide installation service for peace of mind.




