Plexiglass is a polymer compound formed by the polymerization of methyl methacrylate, and is an important thermoplastic that was developed earlier. Plexiglass is divided into four types: colorless and transparent, colored and transparent, pearlescent, and embossed. Plexiglass has good transparency, chemical stability, mechanical properties and weather resistance, easy to dye, easy to process, beautiful appearance and so on. Plexiglass is also called gelatin glass and acrylic.
Polycarbonate hollow sheet mainly uses polycarbonate as the main raw material. It integrates lighting, heat preservation and heat insulation. It can not only shade the sun and rain, but also resist the invasion of bad weather.
So is it better to use PC hollow sheets or plexiglass for the roof? Let's break it down a bit further.
Although plexiglass is cheaper, its thermal insulation and thermal insulation properties are weak. Of course, plexiglass has good light transmission, rich shapes, and wide application, but its practicality is poor. In terms of weight alone, the PC hollow sheet is only half of the plexiglass, effectively reducing the freight and labor costs for the same distance. The use of PC hollow sheets not only satisfies the balcony's rain-shielding effect, cold protection in winter, and heat dissipation in summer, but also have the following characteristics to meet your roof construction requirements for various houses.
Light transmission: PC hollow sheet has better light transmission. Moreover, one or both sides of the sheet will be covered with UV coating, and it will not produce yellowing, or fogging, and affect light transmission when exposed to sunlight. After 10 years, the loss of light transmission is only 10%, while the loss rate of PVC is as high as 15%-20%, and that of glass fiber is 12%-20%.
Long service life: The PC hollow sheet is made of imported high-quality German Bayer polycarbonate raw materials, which can provide a 10-15-year warranty, suitable for protecting valuable artworks and exhibits.
Thermal insulation: keep cool in summer and keep warm in winter. The thermal conductivity (K value) of PC hollow sheet is lower than that of ordinary plexiglass and other plastics, and the heat insulation effect is 7%-25% higher than that of the same plexiglass. The heat insulation of the double-wall hollow sheet can be as high as 49% so that the heat loss is greatly reduced. It is used in buildings with heating equipment and is an environmentally friendly material.
Weather resistance: PC hollow sheet can maintain the stability of various physical indicators in the range of -40°C to 120°C. After 4000 hours of artificial weathering test, the degree of yellowing is 2, and the decrease of light transmittance is only 0.6%.
Flame retardancy: in line with international standard B1 level. The ignition point of the PC hollow sheet itself is 580°C, and it will self-extinguish after leaving the fire. It will not produce toxic gas when burning, so it will not promote the spread of the fire.
To sum up, whether PC hollow sheet or plexiglass is more suitable for building a roof depends on your budget, construction requirements, quality requirements and warranty period. If you have needs for PC hollow sheets, please contact us for samples or the best quotation.




